YD8103 – Power Trackbarrow w/ Gas Shock Assist – Hopper
Take Control
This compact, powerful tracked wheelbarrow allows you to maneuver heavy loads across tight jobsites. Easily moving up to 660 lbs. of material across any terrain, the tracks keep it from chewing up grass and degrading the lawn. Perfect for almost any DIY application, once you use this motorized, tracked wheelbarrow you’ll wonder why you didn’t own one before.
WHERE TO BUY
FEATURES & BENEFITS
- 660 lb payload capacity
- Gas shock assist helps dump the heaviest loads with ease and accuracy
- Tracks offer all-terrain traction and stability across uneven, muddy and wet ground
- Powered by Briggs & Stratton 900 Series engine
- Multi-speed heavy-duty transmission (3 Forward speeds plus Reverse)
- Zero turn radius for pivoting on a dime without damaging the ground
- Evenly balanced to maximize control and prevent tipping
- Controls ensure an instant stop with release of drive handle – prevents usage without engagement
- Solid steel hopper, frame, and handles for durability
FAQs
FAQs
How much space do I need to turn around with “zero turn radius”?
For the YD8103, you would need a space that is 8ft 3in diameter (across) at it’s narrowest point. See the diagram above in the product photos section.
What is the smallest opening through which I can drive the YD8103?
You would need a width of at least 26.25 inches for your machine to pass through.
How much of an incline can I drive my trackbarrow up/down? What’s the maximum slope? What about driving it across an incline?
The limiting factor when using your barrow on an incline or slope is the engine oil. All of our engines are equipped with low oil shut down and the engine will shut down if there isn’t enough oil to keep it lubricated.
If you have it at the minimum level on the dip stick required by the oil sensor (370ml) it breaks down as follows:
- The engine will not shut down whatever degree when the power wheelbarrows declines from right to left (Right hand side higher than the left hand side).
- The engine will shut down at 9.2 degree when the power wheelbarrow declines from the left to the right. (Left hand side is higher than the right hand side).
- The engine will shut down at 26 degree when the power wheelbarrow declines from the front to the rear (The front is higher than the rear).
- The engine will shut down at 19 degree when the power wheelbarrow declines from the rear to the front (The rear is higher than the front).
When the engine is with maximum engine oil allowed (top notch of the dipstick), i.e. 670ml
- The engine will not shut down whatever degree when the power wheelbarrows declines from right to left. (Right hand side higher than the left hand side)
- The engine will shut down at 20.5 degree when the power wheelbarrow declines from the left to the right. (Left hand side is higher than the right hand side).
- The engine will not shut down at whatever degree when the power wheelbarrow declines from the front to the rear (The front is higher than the rear).
- The engine will not shut down at whatever degree when the power wheelbarrow declines from the rear to the front (The rear is higher than the front).
Don’t see your question answered here?
If you don’t see your question answered here, head over to the FAQ page. Still need an answer? Contact us.
SPECS
| SPECIFICATIONSDOWNLOAD PDF | |
| Model Number | YD8103 |
| Engine | Briggs & Stratton |
| Displacement | 208cc |
| Product Weight | 384 lbs |
| Capacity (Level Ground) | 660 lbs |
| Hopper Capacity | 4.3 cu ft |
| Speeds | 3 Forward / 1 Reverse |
| Track Width | 7″ |
| Box Dimensions (L x W x H) | 34″ x 25″ x 11.5″ |
| Hydraulic | No |
| Zero Turn Radius | Yes |
| Warranty | 2-Year Residential; 90-Day Commercial |
