Power Trackbarrow w/ Hydraulic Assist – Hopper
The Mother Load
Talk about heavy-duty performance! Do you need to move massive amounts of concrete, dirt or debris around a jobsite, and do so with a minimum amount of elbow grease? Look no further. This hydraulic-assisted trackbarrow can carry and dump up to 1,100 lbs with ease, saving you time — and your back. You’ll never experience work the same way again when you use this tracked wheelbarrow.
WHERE TO BUY
FEATURES & BENEFITS
- 1,100 lb payload capacity
- Hydraulic assist easily controls the dumping of materials where you want them
- Powered by Briggs and Stratton 900 Series engine
- Tracks offer all-terrain traction and stability across uneven, muddy and wet ground
- Multi-speed heavy-duty transmission (3 Forward speeds plus Reverse) allows material to be moved quicker reducing labor hours
- Turn on a dime — zero turn radius and narrow footprint allows you to work in tight spaces
- Evenly balanced to maximize control and to prevent tipping
- 2-position throttle control ensures an instant stop with release of the drive handle
FAQs
FAQs
How much space do I need to turn around with “zero turn radius”?
For the YD8105, you would need a space that is 8ft 9.2in diameter (across) at it’s narrowest point. See the diagram above in the product photos section.
What is the smallest opening through which I can drive the YD8105?
You would need a width of at least 28in for your machine to pass through.
How much of an incline can I drive my trackbarrow up/down? What’s the maximum slope? What about driving it across an incline?
The limiting factor when using your barrow on an incline or slope is the engine oil. All of our engines are equipped with low oil shut down and the engine will shut down if there isn’t enough oil to keep it lubricated.
If you have it at the minimum level on the dip stick required by the oil sensor (370ml) it breaks down as follows:
- The engine will not shut down whatever degree when the power wheelbarrows declines from right to left (Right hand side higher than the left hand side).
- The engine will shut down at 9.2 degree when the power wheelbarrow declines from the left to the right. (Left hand side is higher than the right hand side).
- The engine will shut down at 26 degree when the power wheelbarrow declines from the front to the rear (The front is higher than the rear).
- The engine will shut down at 19 degree when the power wheelbarrow declines from the rear to the front (The rear is higher than the front).
When the engine is with maximum engine oil allowed (top notch of the dipstick), i.e. 670ml
- The engine will not shut down whatever degree when the power wheelbarrows declines from right to left. (Right hand side higher than the left hand side)
- The engine will shut down at 20.5 degree when the power wheelbarrow declines from the left to the right. (Left hand side is higher than the right hand side).
- The engine will not shut down at whatever degree when the power wheelbarrow declines from the front to the rear (The front is higher than the rear).
- The engine will not shut down at whatever degree when the power wheelbarrow declines from the rear to the front (The rear is higher than the front).
Don’t see your question answered here?
If you don’t see your question answered here, head over to the FAQ page. Still need an answer? Contact us.
SPECS
| SPECIFICATIONSDOWNLOAD PDF | |
| Model Number | YD8105 |
| Engine | Briggs & Stratton |
| Displacement | 208cc |
| Product Weight | 563 lbs |
| Capacity (Level Ground) | 1,100 lbs |
| Hopper Capacity | 7.9 cu ft |
| Speeds | 3 forward / 1 reverse |
| Track Width | 7 in |
| Box Dimensions (L x W x H) | 37.5″ x 27″ x 18.5″ |
| Hydraulic | Yes |
| Zero Turn Radius | Yes |
| Pump Flow | 2.3 gal/min |
| Warranty | 2-Year Residential; 90-Day Commercial |
